Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving Murphy, TX

Pre-Paint Washing in Murphy, TX

Washing siding and trim before painting or staining so new paint bonds to a clean surface. Typical cost $250-$600.

Looking for pre-paint washing in Murphy, TX? We look at the surface first, choose the right method and pressure for it, and give you a price before any work starts.

Method and pressure

Soft wash or low-pressure washCleaning method

When to book pre-paint washing

  • You're about to paint or stain the house
  • Chalky residue comes off on your hand
  • Mildew or dirt under the old paint

What causes the dirt and stains

  • Paint chalking as it ages
  • Mildew that will grow through new paint if not killed
  • Dirt that weakens adhesion

What you can do yourself

  • Ask your painter what prep they need
  • Allow siding to dry for the time the paint maker recommends before painting

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Painting over mildew, which bleeds through
  • Too much pressure that damages wood or drives water into the wall
  • Painting before the wood is dry

How we handle pre-paint washing

  1. Coordinate with your painter
  2. Protect plants and fixtures
  3. Kill mildew and wash the surface
  4. Remove loose chalk and dirt
  5. Leave the house to dry before painting

Pre-Paint Washing cost in Murphy, TX

$250-$600Typical range for a typical home exterior
2-4 hours plus dry timeTypical time on site
Before every exterior paint jobRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Local pre-paint washing for Murphy, TX

Mildew and algae are the main reason Texas homeowners wash their siding. Shaded walls can turn green within months, and pressure alone doesn't kill the growth, so we use a soft wash solution that does.

Parts of Texas are exposed to hurricanes and tropical storms. After a storm, washing removes mud, debris and salt spray from siding, screens and walkways. Check for damage first: loose siding, broken screens and roof damage need repair before anyone washes them.

Near the coast, salt air leaves a film on siding, windows, screens and railings that dulls finishes and speeds up corrosion on metal. Regular rinsing and washing help protect them.

Much of Texas has hard water. Sprinklers and misters leave white mineral spots on walls, windows, fences and pool tile, and those spots need a mineral-safe cleaner, not more pressure.

Some cities in Texas limit outdoor water use, including washing hard surfaces with a hose, especially during drought declarations. Pressure washers use far less water than an open garden hose, but rules vary, so it's worth checking your city's current restrictions. Wash water should also be kept out of storm drains.

Besides Murphy (ZIP codes 75048, 75074 and 75094), we handle pre-paint washing in Parker (2.8 mi), Sachse (2.9 mi), Wylie (4.3 mi) and Plano (5 mi). Call (555) 010-0000 for a free quote in Murphy.

Pre-Paint Washing: frequently asked questions

How much does pre-paint washing cost in Murphy, TX?

Pre-Paint Washing typically costs $250-$600 for a typical home exterior, and usually takes 2-4 hours plus dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for pre-paint washing?

Pre-Paint Washing is done with soft wash or low-pressure wash. Low pressure and the right solution remove growth and dirt without damaging the surface, and the growth takes longer to come back.

Is pre-paint washing safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule pre-paint washing?

Before every exterior paint job. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Murphy, TX

Driveway Cleaning for Exposed Aggregate

Moderate-pressure wash. Exposed aggregate concrete has stones showing at the surface.

Typical $150-$400

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Rust Stain Removal

Removing orange rust stains from sprinklers, fertilizer, furniture and well water on concrete, siding and masonry.

Typical $150-$500

Graffiti Removal for Stone & Stone Veneer

Low-pressure wash. Natural stone and manufactured stone veneer vary a lot.

Typical $200-$800

House Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $300-$700

Exterior Mold & Mildew Removal for Composite Decking

Low-pressure wash. Composite decking doesn't need staining, but it does grow mold and mildew, especially in shade and between boards.

Typical $250-$700

Paver Cleaning & Sealing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $600-$1,800

Deck Cleaning for Pressure-Treated Wood

Low-pressure wash. Pressure-treated pine is the most common deck and fence wood.

Typical $250-$600

Patio Cleaning for Travertine

Low-pressure wash. Travertine is a natural limestone popular around pools.

Typical $150-$400

Driveway Cleaning for Stamped Concrete

Moderate-pressure wash. Stamped and colored concrete is usually protected by a sealer.

Typical $150-$400

HOA & Apartment Pressure Washing

Building washing, sidewalks, breezeways, pools and amenity areas for HOAs, apartments and condos.

Typical $800-$5,000

Roof Cleaning for Tile Roofs

Soft wash. Clay and concrete tile roofs grow algae, moss and lichen, especially in shade.

Typical $400-$1,000

Ready for a cleaner home or business?

Get a free pressure washing quote in Murphy, TX. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote